MENU
Lake-Link Home
LOGIN
Lake-Link
LOG IN

Using battery operated ice augers

11/28/18 @ 2:57 PM
ORIGNAL POST
gater
MEMBER since 11/25/07

I'm getting ready to make the switch to using a battery operated ice auger. I have done research on the topic, most of the info I found is a few years old. I'm starting a new thread on the topic because things have changed a lot in the last couple of years. I'm looking for any info on using battery-powered ice augers that will help with the switch go smoothly. Im leaning towards  the k drill. What do you use? Do you take the battery off when out on the ice? Do you take cordless drills off the auger on the ice? How important is it to keep the battery warm? Any other information on the subject that would help someone get started with batteries would be great. 

DISPLAYING 1 TO 10 OF 156 POSTS
FILTER OPTIONS
11/7/19 @ 8:44 PM
CMunyon
User since 5/12/16

Unsinkable,had the same problem as you.I got the clam plate last year-love it.I wish i had done it sooner.I would get the extension also.

11/7/19 @ 4:21 PM
perch chaser
User since 2/6/03

FYI ...  if you  are  or know a machinist, I put this out a few years ago. The chucks are easily removed, make  the extension any length you want, and  cut the diameter to fit just about any type of auger you want.  Mine happens to fit all the  Strikemaster lazer auger sizes. Best of all, never have to worry about  dropping thru the hole, because it's threaded.

11/7/19 @ 3:58 PM
Unsinkable2
User since 10/4/19

I bought 4, 6ah batteries.  I move and punch holes until I find fish.  For me, I’ve never needed the 3rd or 4th battery.  

I keep the batteries off of the ice and out of the wind when I’m not using them, and inside the house when I’m not ice fishing, and haven’t had any problems with them.  

The only problem I’ve had is my wrists getting jammed and tweaked when breaking throw the bottom of the hole after about a dozen holes.  

I really don’t want to add weight to the set up, but I’m going to take a look at that clam plate, and see if that helps the wrists.  

11/7/19 @ 3:12 PM
Junkie4Ice
Junkie4Ice
User since 12/19/11

...The ion because it was too cold for the gas auger to start? ;) 

Bottom line - it's personal preference based on fishing style and priorities in an auger.

11/7/19 @ 2:19 PM
Salmon/walleyeangler
User since 5/29/16

Okay for everyone saying gas is not reliable how about you take care of your augers and run good gas and oil. As long as you take care of them they will last forever. I am from southern wi but I fish from here all the way to lake of the woods. I fished that cold spell last year when it was -35 and who do you think drilled more holes my gas auger or his ion? 

11/7/19 @ 2:03 PM
Fishlovme
Fishlovme
MEMBER since 6/22/01

Ha, gas will start in all conditions.  Wrong!  I fished in 28 below last winter for an ice fishing derby and my buddy brought along his gas auger because it was a 10 inch and we wanted to fish some tipup holes.  The thing wouldn't start!  We had to bring it in the shack and thaw it to get it started and then it barely ran!  Luckily I brought my Dewalt drill with me with a six inch auger so we could at least fish out of the shack for a while.  I just keep the batteries in a cooler bag with two hand warmers.  Never had any problems with the battery not working!  I've drilled 50 holes on one battery (5 MaH), so I usually don't even bother bringing that second battery with me anymore.  My gas auger hasn't been used in 2 years and unless I go way up north or want to fish nothing but northerns I won't use it down here in Southern Wisconsin.  Our ice just doesn't get thick enough to need a gas auger.

11/7/19 @ 12:09 PM
TheWhipGuy
User since 2/13/10

For very little money you can turn your old hand auger into a heck of a fast hole drilling machine.  Drills about 3"/sec.  Just get a heavy duty adapter rod like the MegaExtenDapter (full disclosure.. I sell these).  Not for everybody of course but if you have or need a heavy duty drill and have a hand auger or can get one cheap from somebody, a cordless brushless drill coupled to a hand auger is by far the best bang for the buck.  You can cut lots and lots of holes with a 5Ah battery.

11/7/19 @ 10:43 AM
RangerKid
User since 6/26/01

I went with the 7 inch Nero, and find it to be a good compromise between between a auger sizes. Having a bigger hole is nice even if not needed, and I still get as many holes as I need in a day. The Nero cuts through so fast, it's  amazing. 

One issue I have is the chuck seems to loosen up every 4 or 5 holes, and the chuck is chewing up the adapter. I have a Milwaukee drill. Anyone else experience  this. 

11/7/19 @ 9:13 AM
vegas492
vegas492
User since 5/21/03

Full disclosure?  I'm a novice ice fisherman.  This is my third year doing it, and second with my gear.  I got the 8 inch K Drill along with the recommended Milwaukee Fuel Drill for it.  Came with 2 5AH batteries.

I used a friend's Jiffy a couple of times prior to purchasing my own drill.  Tough to start, smelled terrible, very heavy.  Cut great.

The K-Drill is so light and powerful that it is crazy.  Even my wife uses it to cut holes.  While I've never run out of battery juice, I'm probably going to get the 9AH battery this year.

It's expensive, but well worth it.  I really don't care about chipper blades versus shavers.  I don't ice fish enough for that to make any kind of a difference.  What I like is the light weight of the K-drill, it's reliability and it's ease of use.  I've not had any issues with batteries not liking cold, but then again, the batteries are either in the heated shack, or in a truck.  I never let them lay out in the cold.

11/7/19 @ 8:58 AM
BigMusky12
BigMusky12
User since 12/22/04

I use insulated tip-ups is how I have dealt with that, but yes...I have had to squeeze some tank Crappies through shrinking holes when hopping around.   good thing is if that that tight, they cannot swim back down that easily!   

I can't believe someone is making argument about reliability of a gas auger... give me a break, I am pretty sure starting problems have plagued small engines since beginning of time.   The benefit of a gas auger is pounding out tons of holes through thick ice without having to worry about recharging batteries if you are staying out on a lake for a whole weekend or fishing back to back to back days where you cannot recharge them fast enough.     

DISPLAYING 1 TO 10 OF 156 POSTS
Advertise here
Advertise here
Please take a moment to visit our sponsors. Without them we would not be here.