MENU
Lake-Link Home
LOGIN
Lake-Link
LOG IN

Eskimo HC40 - Oil Level Check

7/29/16 @ 8:08 AM
ORIGNAL POST
mjensen
User since 2/24/11

I bought a new HC40 and it was difficult to read the oil level so I asked Eskimo how to do it.  Here is their response:

-----------------

To properly check the oil level you want to unscrew the oil cap, which is also the dipstick, and the auger should be on a level surface. The oil should be just touching the bottom of the threaded portion where the oil plug threads into. To check it using the dipstick you will unthread it, clean it off, and just place it back in the without threading it down.

-----------------------

This is the first engine that I didn't have to thread the dipstick back down to check the oil so I thought I would post it.  


DISPLAYING 1 TO 2 OF 2 POSTS
FILTER OPTIONS
8/1/16 @ 8:56 AM
Tim Zwieg
User since 1/10/12

Good to know, thanks.  By the way, I love my HC-40, how about you?

DISPLAYING 1 TO 2 OF 2 POSTS
Advertise here
Advertise here
Please take a moment to visit our sponsors. Without them we would not be here.