3/16/22 @ 10:25 AM
ORIGINAL POST
USER SINCE 5/31/17

I was wondering how to properly space a set of either lead core or copper lines relative to each other’s length. Say for instance your outside board is a 5 color, and inside board is a 7 color.  I know the 7 color is deeper and hooked fish on the 5 color should pass over if properly behaved. What I always wonder is if backing should be let out on that 5 color to place the lure behind the lure for the 7 color and maintain a “V”, or if that 5 color board should be set right at the backer and run in front of the 7 color lure creating a “/\” relative to the boats transom.  I have heard differing opinions. Is there a “correct” answer?

DISPLAYING 1 TO 10 OF 12 POSTS
FILTER OPTIONS

7/1/22 @ 11:42 AM
CCA
USER SINCE 6/19/01

Think about the double V theory, need a V both horizontal and verticle, that is how I run my spread.

7/1/22 @ 9:06 AM
fishmunkee
USER SINCE 3/20/02

I think Keating knows what he is doing.

6/30/22 @ 1:51 PM
USER SINCE 5/31/17

Fishrepellent,

Longer leader or more backer before board = same impact.   The gist of my question is should the 5 color bait be behind the inner 7 color bait. Not the board  mind you, that will always be outside & behind,  but the bait. In Keating’s books, the diagrams frequently show baits like this 5 color core example I gave  IN FRONT and above the inner 7 core bait. That is opposite of how I fish, and what I do results in LONG outside lines if you’re trying to get behind a 7 or 10 color inside. Just wondering if there is a “right way”.

6/20/22 @ 2:49 PM
fishrepellant
USER SINCE 3/25/10

3/18/22 @ 9:34 PM
X-Ray
USER SINCE 3/30/15

Skeeter,

The board. You want it out and behind the inner board.  Fish hits and it increases drag pulling the board inward.  As for where to place say the 5 color lure relative to the 7 color lure,  you want those to work together. Salmon will come up to the 7 color. If they don’t take it they will turn away and generally up. You would want the 5 color lure behind the 7 color lure or there abouts.  You get this by having the 5 color board behind the 7 color board. This is how dipsys and riggers works together when your running deep as well. Dipsy will be well behind the rigger and higher up.

3/17/22 @ 7:24 AM
Thump55
USER SINCE 7/19/04

The release on the board and good horizontal separation between the inner and outer boards will keep 99% of fish from tangling things up.

Setting your outer line back further will only increase the chance of a fish on your inner board running into your outer line.

3/16/22 @ 5:29 PM
USER SINCE 5/31/17

X-ray-

do you mean the actual board or the terminal end of the core?  This is what I’m talking about. There seems to be two different opinions just in these answers.  I understand the board will be “behind and outside” on the 5 color vs the inside 7 color. But the 5 vs 7 color on the terminal end is separated by 60’ plus leader length (with the 5 being shorter). So then do you let out 75-100 backer when setting the 5 color to place the terminal end past the terminal end of the 7 color?  I must be really dense because this is really confusing  to me.

And yes, I’m using sams pro releases and big boards. At least I’ve got something right??

3/16/22 @ 3:57 PM
Thump55
USER SINCE 7/19/04

Similar to what X-ray said, make sure you are using a big enough board to pull that outside line waaaay out. I put out 20' of backer so I don't have to lift the lead up when bringing the board in and call 'er good. I would not let out any extra line to drop it back farther.

3/16/22 @ 11:44 AM
X-Ray
USER SINCE 3/30/15

I’d add that making sure the outside board is behind the inside board as well. When the fish hits the drag goes way up bringing the outside board inwards. Depending on what your pulling (ff, meat) on the inside board make sure the outside board is well behind the inside board.  Low drag outside board (lc with spoon) can track further out and not behind the inside board with high drag stuff.

3/16/22 @ 11:31 AM
Fish Hound
USER SINCE 1/29/02

Correct!

Also get the Sams Pro releases and set your boards to trip and center, everything clears much nicer.

DISPLAYING 1 TO 10 OF 12 POSTS