MENU
Lake-Link Home
LOGIN
Lake-Link
LOG IN

Need help picking out new outboard

9/11/20 @ 9:17 AM
ORIGINAL POST
CLINCHKNOT
USER SINCE 10/9/03

Greetings:


I have a 31 year old Johnson outboard (pull start) that runs great!  Problem is I am getting older and  my bad right shoulder is not happy when I pull the cord.  Time for electric start.

With Evinrude gone, what to get?  I am thinking of a 20 horse Mercury, Yamaha or suzuki.  I rented a 20 horse Yamaha while on vacation this summer (tiller model, electric start) and fell in love with it.  

My issue is I see almost no Yamaha dealers in SE Wisconson.  Same for Suzuki.  Where would I go when I need it repaired or need some simple part that I can replace.  No motor works forever so I assume some day I need it repaired.

LOTS of mercury dealers around here so perhaps mercury is the best bet.  Can anyone comment that owns a 4 stroke mercury, Yamaha or Suzuki in a 20 or 25 horse?  Just wondering what others have experienced before I decide what brand to buy.


DISPLAYING 1 TO 10 OF 38 POSTS
FILTER OPTIONS

2/27/21 @ 4:46 PM
chaw
MEMBER SINCE 9/11/02

Thanks again for the feedback. I bought a new boat today. I couldn’t spend x amount on a new motor and not upgrade in other areas. In the end it just didn’t make sense for me. Thanks Again. 

2/27/21 @ 4:26 PM
hook, line&sinker
USER SINCE 4/18/07

I have the Yamaha 4 stroke.  It is 12 years old and everything on it works fine. Years ago I had a Mercury and had one problem after another. Hopefully Mercury has improved, but the Yamaha 4 stroke is an excellent motor.

2/27/21 @ 1:42 PM
chaw
MEMBER SINCE 9/11/02

Thanks Eyesman. That is a bunch of great info.Very much appreciated. 

2/27/21 @ 11:40 AM
eyesman
eyesman
USER SINCE 1/7/02

chaw, a few things to consider when repowering a boat. If you are going from a two stroke to a four stroke the four stroke will weigh more and you will need to verify if your boat can handle the added weight. I would check several local boat dealers for price and availability. The supply chain in so many products is out of kilter and it may be difficult to find a motor without some delay. A dealer can help with assessing the weight issue as well as having service available if needed. April 2020 I had to repower my 1448 Jon boat. It is rated for a 25 hp so that is what I looked for. Had just about pulled the trigger on an Envirude E-Tec when I ran across a Mercury that a dealer had. The Mercury was several hundred dollars less and available, the Evinrude was a 3-4 week order time at least. The new four stroke was over 55 lbs heavier that the two stroke. To overcome that I had to move the 5 gallon gas tank from the space between the rear bench seat and the transom to mid boat. That did balance out quite well. I am glad I didn’t get the Evinrude now that they are out of business. Another thing to consider is the prop you put on the new motor. Even the 25 hp had a choice between a couple different props. I chose the one with the best hole shot to get up on plane quick and easy. I use the Jon boat on the Wolf River exclusively where I do more stop and go motoring than the need for flat out speed. How you use you boat will determine the best prop choice and that a good dealer can help with. For the prop choice you need to consider what hp your boat is rated for, the added weight of a four stroke, will you do any trolling with the motor and how often you will have several people in the boat with you for added weight. Most times you hear about someone not happy with boat and motor performance comes down to the wrong prop choice. 

2/27/21 @ 7:40 AM
chaw
MEMBER SINCE 9/11/02

I’m looking for a 60 horse Yamaha or Mercury 4 stroke. My old motor is toast. I have never bought just the outboard and am having trouble getting started. I see a lot of inventory on EBay but I would rather go through a reputable dealer. I’ve looked at inventory at local boat dealers but see nothing. Where do I start to narrow things down? Will the prices all be fairly comparable? I’m seeing the motor listed in the 6,000 dollar range. Can someone push me in the right direction? I’m kind of spinning my wheels. 

2/12/21 @ 10:43 AM
BassMazz
USER SINCE 2/1/18

I have sold and serviced both brands, But am a bit more fond of the Yamaha in that HP class. Mostly because the smaller Mercs are Tohatsu powerheads and I am not impressed with too many China products. 

Yamaha has several dealers in the Madison area with Don's Marine in Lodi as a full line dealer and Quam's in Stoughton, Rock River Marine in Newville, and several more. Some are full-line and some are package and service dealers meaning they can only sell a motor with a boat and offer service to Yamaha customers. Also, JNT's marine Pros in Whitewater is a full line platinum Yamaha dealer with several Yamaha's currently in stock, Give Jason a call at 262-473-5960 if interested 

2/10/21 @ 12:13 PM
AllDayIDreamAboutSmallies
AllDayIDreamAboutSmallies
USER SINCE 3/14/06

Jalenskys  in Kenosha is a recommended Yamaha dealer/service!

2/3/21 @ 4:17 PM
Symmetre
USER SINCE 5/11/20

Mercury 30hp and smaller are all made in Japan (not China) by Tohatsu. If you have mostly Merc dealers in your area, then good, because you'll never have an issue finding parts. Just buy one and be happy, they're top quality engines.



1/21/21 @ 8:46 PM
haf2fsh
MEMBER SINCE 6/23/01

Honestly there all good, the dealer makes the difference. I've been loyal the the same place for 30 years. They take care of me, although for the most part my Mercury's have been trouble free. Just repowered last year. Swapped a 2003 for 2020 60 4 stroke, wasn't really anything wrong with old one just had many hours on it.  Have friends with Yammies, Honda, and E-tech all great motors. 


1/21/21 @ 7:56 PM
gobbler
MEMBER SINCE 6/30/01

Yamaha  Moon Marine, fondulac, reccomend.

DISPLAYING 1 TO 10 OF 38 POSTS
Advertise here
St. Croix's all-new series of technique-specific rods features extreme performance blanks and materials specific to each model. PRODUCT SPOTLIGHT: ST. CROIX RODS - Croix Custom Ice series
The Deadeye Custom Series rods are all custom technique specific walleye jigging rods designed for the tournament walleye angler. PRODUCT SPOTLIGHT: OKUMA FISHING TACKLE - Dead Eye Custom Series Rods
Whether you’re looking to plan your next fishing trip, or just make the most of your time on the water, the Humminbird FishSmart app can help. PRODUCT SPOTLIGHT: HUMMINBIRD - Humminbird FishSmart App
Advertise here
Please take a moment to visit our sponsors. Without them we would not be here.