Transducer Arm for Humminbird

11/26/15 @ 1:37 PM
ORIGINAL POST
DRYAN
DRYAN
USER since 11/26/15
Can anyone tell me how to get in contact with Shane 123? I've seen some pics online of his transducer arms. Or do you know of others who make transducer arms that are compatible with Humminbird ICE 35? I'm sick of the float and I don't want to buy one of those cheap plastic arms for Marcums. I know I could make one of those work but I've known several guys that complained about how those snap or crack. Any help would be appreciated.
Post Your Comment
Displaying 1 to 10 of 16 Posts
1/4/16 @ 10:16 AM
Insane1
Insane1
USER since 12/23/05
Thx Tim....p.m. me if you want more details. Smile

Post Your Comment
1/4/16 @ 10:06 AM
Tim Zwieg
Zwiegs
USER since 1/10/12
This looks kind of sweet, may have to look into doing something like this

Post Your Comment
1/2/16 @ 7:21 PM
Insane1
Insane1
USER since 12/23/05
Here`s mine. Simple aluminum pieces I made myself....

Post Your Comment
1/2/16 @ 2:18 PM
mrjohnson600
mrjohnson600
USER since 6/23/11
Thanks!

Post Your Comment
1/2/16 @ 1:11 AM
lunker75
lunker75
USER since 12/13/13
Mr johnson the lip is 7/8 thick sand i used 1 3/8 spacer to clear the lip for the folding arm to clear and tuck in the unit

Post Your Comment
1/1/16 @ 7:00 PM
lunker75
lunker75
USER since 12/13/13
Mrjohnson600 ill get a measurement of the lip when i get home later and let u know i used an aluminum 1/2 thick by 1" round spacer but not sure how many washers i used but ill let u know it works perfectly

Post Your Comment
1/1/16 @ 6:17 PM
mrjohnson600
mrjohnson600
USER since 6/23/11
Lunker,

How thick is that front lip on the humminbird case? I've got a marcum arm for mine and need to get a spacer. I don't have mine with me to get a measurement. Thanks!

Post Your Comment
12/5/15 @ 9:30 AM
DRYAN
DRYAN
USER since 11/26/15
Thanks, Lunker. I sent an email to shane 123 about 5 days ago. I'm just waiting for a reply. If he ever gets back to me then I'll know just what hardware to use. I went to a couple local hardware stores looking for something similar to what you have but at least now I know what they are called. This will help very much. If I don't hear from Shane in a few more days then I think I'll try and order one from MrBallistic. He sells some aluminum replacement arms as well. I appreciate all the help. Good luck on the ice this year.

Post Your Comment
12/3/15 @ 1:34 AM
lunker75
lunker75
USER since 12/13/13
Pic of the furniture bolt ,wide and flat.

Post Your Comment
12/3/15 @ 1:26 AM
lunker75
lunker75
USER since 12/13/13
Dryan i used a allen furniture bolt 3/4 wide and flat bottom and thread's were 1/4" with an aluminum 1" round × 1/2 thick spacer from my work with a nylon locking nut .Only about 1/16 thick on bottom fits perfect. Send me a pm when you decide to get any one of the arms out there and if you need any pics ill show u how mine is mounted and spaced so it can fold in without hitting the lip and also being able to close the soft carring case . I believe i have some extra spacers also

Post Your Comment
Displaying 1 to 10 of 16 Posts