Pickup truck box ramp

1/26/16 @ 6:58 PM
ORIGINAL POST
Lund forever
Lund forever
USER since 1/21/08
What to look for in a ramp for snowblower and ATV?
Post Your Comment
Displaying 1 to 3 of 3 Posts
1/28/16 @ 8:07 PM
Lund forever
Lund forever
USER since 1/21/08
After three day of searching stores and the internet, I finally found what I wanted at lowes. And they were the only place. What I wanted was a aluminum model 7.5 ft long that was hinged in the middle. I wanted the hinge because I have a 6.5 ft long box on my truck and I can store them in the box out of sight. The surface had to be non slip with small enough spaces so I can walk up a snowblower. Reese was the only brand that had all of that. Lund

Post Your Comment
1/27/16 @ 8:50 AM
NAV165
NAV165
USER since 5/23/05
I use a tri fold ramp. I have a couple of plywood boards cut the length of the ramps that I lay on if I need to load my snow blower or anything else with smaller wheels. I'm not sure how long mine are but I had a set of short ramps that made it pretty tough to load the ATV without the front wheels lifting up so I bought some longer ones that make it much easier. If you have shorter ramps backing in to a ditch or loading off a snowbank works too.

Post Your Comment